留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

江苏省含铜蚀刻废液处置利用行业现状及管理对策研究

顾明事,  李兴福,  凌梦丹,  焦少俊,  黄文平,  张俊,  王玉婷,  张后虎,  赵泽华

downloadPDF
文章导航 > 环境工程技术学报  > 2018 >  8(2): 200-204
顾明事, 李兴福, 凌梦丹, 焦少俊, 黄文平, 张俊, 王玉婷, 张后虎, 赵泽华. 江苏省含铜蚀刻废液处置利用行业现状及管理对策研究[J]. 环境工程技术学报, 2018, 8(2): 200-204. doi: 10.3969/j.issn.1674-991X.2018.02.027
引用本文: 顾明事, 李兴福, 凌梦丹, 焦少俊, 黄文平, 张俊, 王玉婷, 张后虎, 赵泽华. 江苏省含铜蚀刻废液处置利用行业现状及管理对策研究[J]. 环境工程技术学报, 2018, 8(2): 200-204. doi: 10.3969/j.issn.1674-991X.2018.02.027
shu
GU Mingshi, LI Xingfu, LING Mengdan, JIAO Shaojun, HUANG Wenping, ZHANG Jun, WANG Yuting, ZHANG Houhu, ZHAO Zehua. Research on copper-containing etching waste liquid disposal and management countermeasures in Jiangsu Province[J]. Journal of Environmental Engineering Technology, 2018, 8(2): 200-204. doi: 10.3969/j.issn.1674-991X.2018.02.027
Citation: GU Mingshi, LI Xingfu, LING Mengdan, JIAO Shaojun, HUANG Wenping, ZHANG Jun, WANG Yuting, ZHANG Houhu, ZHAO Zehua. Research on copper-containing etching waste liquid disposal and management countermeasures in Jiangsu Province[J]. Journal of Environmental Engineering Technology, 2018, 8(2): 200-204. doi: 10.3969/j.issn.1674-991X.2018.02.027
shu

江苏省含铜蚀刻废液处置利用行业现状及管理对策研究

doi: 10.3969/j.issn.1674-991X.2018.02.027

  • 1. 江苏省固体废物监督管理中心,江苏 南京 210036

  • 2. 环境保护部南京环境科学研究所,江苏 南京 210042

详细信息
    作者简介:

    顾明事(1972—),男,硕士,主要研究方向为固体废物环境管理,gums@jshb.gov.cn

    通讯作者:

    张后虎 E-mail: zhanghouhu2008@163.com

    赵泽华 E-mail: zhaozehuahi@163.com

  • 中图分类号: X703

Research on copper-containing etching waste liquid disposal and management countermeasures in Jiangsu Province

  • 1. Jiangsu Province Solid Waste Supervision and Administration Center, Nanjing 210036, China

  • 2. Nanjing Institute of Environmental Sciences, Ministry of Environmental Protection, Nanjing 210042, China

More Information
    Corresponding author: ZHANG Houhu E-mail: zhanghouhu2008@163.com; ZHAO Zehua E-mail: zhaozehuahi@163.com

    摘要
  • 摘要: 蚀刻废液是对环境有较大危害的危险废物,同时又具有较高的资源型价值。目前江苏省每年蚀刻废液产生量较大,典型的含铜蚀刻废液产生量达数十万t,是江苏省产生量较大的几种危险废物类型之一。在调查了江苏省蚀刻废液处置利用的主要工艺和行业现状的基础上,分析了蚀刻废液处置利用过程存在的综合利用能力总体过剩、入厂分析制度不严、污染防治水平不高、再生产品管理标准缺失、环境管理制度不完善等问题;探讨了含铜蚀刻废液的再生产品使用过程中存在的生态环境风险;研究了蚀刻废液再利用产品中有害物质的控制要求;初步总结了行业发展中技术水平和管理要求的不足;提出了行业发展存在的问题,为下一步制定江苏省蚀刻废液处置利用行业的技术规范提供技术支撑。

     

    Abstract: Copper etching waste liquid is a kind of hazardous waste which has great harm to the environment, and also has high resource value. A large amount of etching waste is produced in Jiangsu Province every year, and typically the annual production of copper etching waste liquid reached hundreds of thousands of tons, which is one of the hazardous waste types with largest amounts. Based on the investigation of the main technologies and current situations of the disposal of the waste liquid in Jiangsu Province, several aspects of problems in the waste liquid treatment and utilization were analyzed, including the excessive capacity of comprehensive utilization, unstrict system of plant analysis, low level of pollution prevention and control, lack of standard for regeneration products management, and imperfect environmental management system. Besides, the environmental risks in the process of regeneration of copper containing etching waste liquor were discussed, and the control requirements of harmful substances in the regenerated products from the etching waste liquid analyzed. The existing problems in the development of the industry, such as insufficiencies of technical level and management requirements, were preliminary summarized, so as to provide technical support for formulating technical specifications on the treatment and utilization of etching waste liquid in Jiangsu Province.

     

    • HTML全文
    • 参考文献(19)
  • [1] 武建刚, 胡嘉莹 . 印制电路板行业废液资源化技术综述[J].科技咨询, 2011(31):79.

    WU J G, HU J Y . Review of waste liquid recycling technology in printed circuit board industry[J].Science & Technology Information, 2011(31):79.
    [2] CUI J R, FORSSBERG E . Mechanical recycling of waste electric and electronic equipment:a review[J]. Journal of Hazardous Materials, 2003,99:243-263.
    doi: 10.1016/S0304-3894(03)00061-X pmid: 12758010
    [3] LI D L, WANG D . Recovery of copper from acidic etcher by IEMEC and its recycling[J]. Journal of Central South University of Technology, 2006,13(1):219-222.
    doi: 10.1007/s11771-006-0134-1
    [4] 王阳 . 线路板蚀刻废液全回收、零排放的产业化处理工艺研究[D]. 广州:华南理工大学, 2012.

    WANG Y . Study on the industrial waste treatment process of circuit board etching waste liquid with full recovery and zero emission[D]. Guangzhou:South China University of Technology, 2012.
    [5] LEE M . Production of nickel metal powder from a spent etching solution by solvent extraction and chemical reduction[J]. Journal of Nanoscience and Nanotechnology, 2011,11(2):1621-1624.
    doi: 10.1166/jnn.2011.3359 pmid: 21456251
    [6] 徐国强 . 含铜蚀刻废液的综合利用研究进展[J]. 有色冶金设计与研究, 2007,28(2):68-71.
    doi: 10.3969/j.issn.1004-4345.2007.02.015

    XU G Q . Research progresses in comprehensive utilization of waste etching solution containing copper[J]. Nonferrous Metals Engineering & Research, 2007,28(2):68-71. doi: 10.3969/j.issn.1004-4345.2007.02.015
    [7] 陈宇 . 江苏省废线路板蚀刻废液利用企业环保准入条件研究[J]. 污染防治技术, 2013,26(5):94-96.

    CHEN Y . Study on the access conditions for the enterprise of waste circuit board etching liquid wastewater reuse in Jiangsu Province[J]. Pollution Control Technology, 2013,26(5):94-96.
    [8] WANG P, LIANG Y, XU S , et al. Polychlorinated biphenyls in spent etching solutions and their copper salt recycling products[J]. Research of Environmental Sciences, 2015,28(3):129-133.
    doi: 10.13198/j.issn.1001-6929.2015.03.18
    [9] FOUAD O A, BASIR S M A .Cementation-induced recovery of self-assembled ultrafine copper powders from spent etching solutions of printed circuit boards[J]. Powder Technology, 2005,159(3):127-134.
    doi: 10.1016/j.powtec.2005.08.001
    [10] 温炎焱, 陈昌铭, 陈志传 . 利用含铜蚀刻废液生产碱式碳酸铜[J].化工环保, 2004(2):131-134.
    doi: 10.3969/j.issn.1006-1878.2004.02.014

    WEN Y Y, CHEN C M, CHEN Z C . The use of copper etching production aerugo[J].Environmental Protection of Chemical Industry, 2004(2):131-134. doi: 10.3969/j.issn.1006-1878.2004.02.014
    [11] QING X, HAN J L, WEN Y S . Concentrations and distribution characteristics of PCDD/Fs in spent etching solution and its copper salt recycling products[J]. Environmental Science, 2013,34(2):642.
    pmid: 23668135
    [12] TURAEV D Y, KRUGLIKOV S S . Regeneration of a solution for electroless copper plating[J]. Russian Journal of Applied Chemistry, 2005,78(4):579-583.
    doi: 10.1007/s11167-005-0345-5
    [13] CAKIR O . Copper etching with cupric chloride and regenweation of waste etchant[J]. Materials Processing Technology, 2006,175:63-68.
    doi: 10.1016/j.jmatprotec.2005.04.024
    [14] DIETZ K . Fine lines in high yield:part XCII.etchant recycling and copper recovery options[J].CircuiTree, 2003(5):48.
    [15] 贾宝琼, 古国榜, 朱萍 . Lix54-100从印刷电路板蚀刻废液中回收铜[J].环境污染治理技术与设备, 2002(11):70-73.
    doi: 10.3969/j.issn.1673-9108.2002.11.017

    JIA B Q, GU G B, ZHU P . Recovery of copper from spent etching solution by Lix54-100 extractant[J].Techniques and Equipment for Environmental Pollution Control, 2002(11):70-73. doi: 10.3969/j.issn.1673-9108.2002.11.017
    [16] 胡耀红, 赵国鹏, 谢素玲 . 印刷线路板含铜废蚀刻液的回用处理(二)[J]. 电镀与涂饰, 2009,28(11):36-40.

    HU Y H, ZHAO G P, XIE S L . Reuse treatment of spent copper-containing etching solution for printed circuit board:part Ⅱ[J]. Electroplating & Finishing, 2009,28(11):36-40.
    [17] 彭芸, 陈镇 . 废蚀刻液两种不同的处理与处置技术[J].印制电路信息, 2007(7):34-36.

    PENG Y, CHEN Z . Comparative analysis of two different treatment technology in PCB spent etching solution[J].Printed Circuit Information, 2007(7):34-36.
    [18] LIANG Q W, HU H P, FU W , et al. Recovery of copper from simulated ammoniacal spent etchant using sterically hindered beta-diketone[J]. Transactions of Nonferrous Metals Society of China, 2011,21(8):1840-1846.
    doi: 10.1016/S1003-6326(11)60939-4
    [19] 陈锋 . 印制线路板行业水处理含铜污泥处置技术综述[J]. 污染防治技术, 2006,19(4):48-50.

    CHEN F . Summary of copper sludge disposal technology of wastewater treatment in printed circuit industry[J]. Pollution Control Technology, 2006,19(4):48-50.
    • 相关文章
    • 施引文献
  • 资源附件(0)
  • 加载中
WeChat 点击查看大图
计量
  • 文章访问数:  871
  • HTML全文浏览量:  117
  • PDF下载量:  342
  • 被引次数: 0
出版历程
  • 收稿日期:  2017-07-05
  • 刊出日期:  2018-03-20

目录

    /

    返回文章
    返回

    版权所有 © 《环境工程技术学报》编辑部 京ICP备05031605号-2

    本系统由 北京仁和汇智信息技术有限公司 设计开发